Light Load Parts

The Light Load Parts category includes parts suitable for handling light load cargo. Designed to execute a task quickly and keep up with high workflow, these parts are light and operate at high velocity.

light load parts

Belt Conveyors

Belt Conveyors are used to transport light load cargo. Can be controlled by digital or analog values.

  • Available lengths: 2, 4 and 6 m
  • Max. conveying speed: 0.6 m/s (digital); 3 m/s (analog)

belt conveyors

PartConfigurationTagI/OTypeDescription
Digital Belt Conveyor (2m, 4m, 6m) # Output Bool Rotate belt (arrow direction).
Digital (+/-) Belt Conveyor (2m, 4m, 6m) # (+) Output Bool Rotate belt (both directions).
Belt Conveyor (2m, 4m, 6m) # (-) Output Bool
Analog Belt Conveyor (2m, 4m, 6m) # (V) Output Float [-10, 10] V: sets the conveying speed (both directions).

Belt Conveyor Gate

Powered slider bed belt conveyor gate designed to provide a passageway to personnel. It's equipped with a closed sensor and can be controlled by digital or analog values.

  • Possible opening angle: 100º
  • Max. conveying sped: 0.6 m/s (digital), 3 m/s (analog)

belt conveyor gate

PartConfigurationTagI/OTypeDescription
Digital Belt Conveyor Gate # Output Bool Rotate belt (arrow direction).
Belt Conveyor Gate # (Opened) Input Bool Gate is open.
Digital (+/-) Belt Conveyor Gate # (+) Output Bool Rotate belt (both directions).
Belt Conveyor Gate # (-) Output Bool
Belt Conveyor Gate # (Opened) Input Bool Gate is open.
Analog Belt Conveyor Gate # (V) Output Float [-10, 10] V: sets the conveying speed (both directions).
Belt Conveyor Gate # (Opened) Input Bool Gate is open.

Conveyor Scale

High speed conveyor scale used for weight control. It measured different weight ranges according to the selected configuration.

  • Max. conveying speed: 0.6 m/s
  • Capacities: 20 and 100 Kg

conveyor scale

PartConfigurationTagI/OTypeDescription
20 Kg Max. Conveyor Scale # (+)OutputBool Rotate belt (both directions).
Conveyor Scale # (-)OutputBool
Conveyor Scale # Weight (V)InputFloat[0, 10] V: current weight.
100 Kg Max. Conveyor Scale # (+)OutputBool Rotate belt (both directions).
Conveyor Scale # (-)OutputBool
Conveyor Scale # Weight (V)InputFloat[0, 10] V: current weight.

Straight Spur Conveyor

Infeed/outfeed multi-belt conveyor, commonly used for accurate merging of loads into belt conveyors. Digital and analog values can control the conveyor.

  • Max. conveying speed: 0.8 m/s (digital); 3 m/s (analog)

straight spur conveyor

PartConfigurationTagI/OTypeDescription
Digital (+/-) Straight Spur Conveyor # (+)OutputBool Rotate belt (both directions).
Straight Spur Conveyor # (-)OutputBool
Analog Straight Spur Conveyor # (V)OutputFloat [-10, 10] V: sets the conveying speed (both directions).

Pivot Arm Sorter

A 45º power face arm diverter, powered by a gearmotor. Equipped with a belt that helps to deviate the conveyed items onto the next part. The arm can rotate left or right according to the selected configuration.

  • Belt speed: 2 m/s
  • Arm angular speed: 5 rad/s

pivot arm sorter

PartConfigurationTagI/OTypeDescription
Turn Left Pivot Arm Sorter # (Turn) Output Bool Turn left.
Pivot Arm Sorter # (+) Output Bool Rotate belt (both directions).
Pivot Arm Sorter # (-) Output Bool
Turn Right Pivot Arm Sorter # (Turn) Output Bool Turn right.
Pivot Arm Sorter # (+) Output Bool Rotate belt (both directions).
Pivot Arm Sorter # (-) Output Bool

Pop-Up Wheel Sorter

A 45º double-sided pop-up wheel sorter used to divert items to three different directions via pivoted rollers.

  • Wheel radius: 0.05 m
  • Conveying speed: 2.5 m/s
  • Normally centered
  • Wheels stroke: 0.003 m

pop-up wheel sorter

PartConfigurationTagI/OTypeDescription
N/A
Pop Up Wheel Sorter # (+) Output Bool Raise and rotate (both directions).
Pop Up Wheel Sorter # (-) Output Bool
Pop Up Wheel Sorter # (Left) Output Bool Turn left or return to center.
Pop Up Wheel Sorter # (Right) Output Bool Turn right or return to center.

Aligners

Thin metal structured attachable to a conveyor to prevent parts from falling when transported at high speeds. There are four types of aligners available and in several colors (Context Menu > Configuration).

aligners

Aligner 1 Aligner 2 Aligner 3 Wheel Aligner

Pusher

Pneumatic pusher sorter equipped with two reed sensors indicating the front and back limits. It also includes a servo valve which can be used to set and measure the rod position. Control can be done by digital or analog values according to the selected configuration.

  • Default speed: 1 m/s
  • Fast speed: 4 m/s
  • Stroke: 0.9 m

pusher

PartConfigurationTagI/OTypeDescription
Monostable Pusher #OutputBoolMove forward.
Pusher # (Front Limit)InputBoolAt front limit.
Pusher # (Back Limit)InputBoolAt back limit.
Monostable (Fast) Pusher #OutputBoolMove forward (fast).
Pusher # (Front Limit)InputBoolAt front limit.
Pusher # (Back Limit)InputBoolAt back limit.
Bistable Pusher # (+)OutputBoolMove forward.
Pusher # (-)OutputBoolMove backward.
Pusher # (Front Limit)InputBoolAt front limit.
Pusher # (Back Limit)InputBoolAt back limit.
Analog Pusher # Set Point (V)OutputFloat[-10, 10] V: sets the target speed.
Pusher # Position (V)InputFloat[0, 10] V: rod position.
Digital & Analog Pusher # Set Point (V)OutputFloat[-10, 10] V: sets the target speed.
Pusher # Position (V)InputFloat[0, 10] V: rod position.
Pusher # (Front Limit)InputBoolAt front limit.
Pusher # (Back Limit)InputBoolAt back limit.

Chute Conveyor

Straight chute conveyor, mostly used to dispatch items from belt conveyors.

chute conveyor

Part

Stop Blade

The stop blade is a pneumatically actuated device used to stop or accumulate material.

  • Normally down
  • Stroke: 0.12 m

stop blade

PartConfigurationTagI/OTypeDescription
N/A Stop Blade # Output Bool Raise.

Bracket and Metal Corner

The bracket is a metal structure used as a height barrier and can be used to attach sensors. The metal corner can be used for several purposes including sensor placement.

Bracket and Metal Corner are available in several colors (Context Menu > Configuration).

bracket and metal corner

Bracket Metal Corner

Positioning Bars

A device used to consecutively position items at the same place by clamping them. Available in two different configurations, left and right.

It is commonly used with Pick and Place Systems.

  • Vertical stroke: 0.373 m
  • Clamper stroke: 0.48 m

positioning bars

PartConfigurationTagI/OTypeDescription

N/A Positioning Left/Right Bar # (Clamp) Output Bool Clamp.
Positioning Left/Right Bar # (Raise) Output Bool Raise.
Positioning Left/Right Bar # (Clamped) Input Bool Item clamped or limit reached.
Positioning Left/Right Bar # (Top Limit) Input Bool Vertical limit reached.